To Next Page

To Previous Page

Grid type: You can choose 240/120V

or 220/208V

Grid Regulation: Select the correct

Grid safety regulation.

Grid Frequency: If the Grid Fre-

quency is nominal at 50Hz, then the

inverter’s Frequency will be adjusted

to 50Hz automatically. If there is no

grid power and it is read as 50Hz but

the devices are 60Hz; then you can

set to 60Hz manually. This is based

on the rated frequency of the local

grid regulation and devices.

Battery type: No battery, Lead-acid,

or Lithium.

If ‘Lead-acid’ battery is selected,

please input the correct battery ca-

pacity.

If ‘Lithium’ battery is selected, please

choose the battery’s brand in the

Lithium brand drop-down list.

Meter or CT: The supported CT ratio

is 1000:1, 2000:1, and 3000:1. The

default CT ratio is 3000:1. If third-

party CT is used, please ensure its CT

ratio is one of the three supported

types and set it accordingly.

Meter type: Please choose setting ac-

cording to the meter installed.

Off-grid output: Enabling this setting

will cause the inverter to provide

backup power if the grid is lost.

Other manuals for EG4 18KPV

Questions and Answers:

Need help?

Do you have a question about the EG4 18KPV and is the answer not in the manual?

General