eKey Home - Page 10

Introduction to the system en│9
Finger scanner controls
Control
Function
Finger swipe
area
Store fingers by “swiping the finger” evenly
downward over the sensor.
Identification by “holding up the RFID
transponder”, which involves holding an RFID
transponder over the finger swipe area of the finger
scanner.
Sensor
System programming by “Finger Touch”, a short,
rapid touch of the sensor with the finger.
Table 2: Finger scanner controls
1 Right guiding edge
2 Sensor
3 Left guiding edge
Fig. 3: Finger swipe area and sensor