EMC-PARTNER TRA3000 S - Page 6

TRANSIENT3000
6/162
7.6
Service of SPD Surge Protective device 105
8 WHAT MUST BE DONE FOLLOWING FAILED OPERATION 107
8.1.1 Error caused by incorrect inputs „Generator not ready for run“ 107
8.1.2 Error caused by running problem „Generator stopped“ 108
8.1.3 Failure based on error at the generator „Hardware error“ 109
8.2 Service; Repairs 110
8.2.1 Service Flowchart of TRA3000 System: 110
8.2.2 Data Transfer via UBS Stick 111
8.3 Spare parts list 111
8.4 Check before you contact the service of EMCP 111
8.4.1 Fuses 111
8.4.2 Seltests 112
8.4.3 System Reset (Software) 113
8.5 Service department of EMC PARTNER AG 114
9 PACKAGING AND TRANSPORT 115
9.1 Packaging 115
9.2 Transport 115
10 RECYCLING / DISPOSAL 117
10.1 RoHS directive 2002/95/EG 117
10.2 WEEE directive 2002/96/EG 117
10.3 Information for dismantling 117
10.4 Parts which can be recycled 117
10.5 Parts which can not be recycled 117
11 ACCESSORIES 119
11.1 TRA3000 F-S-D-V-C 119
11.1.1 Accessories TRA 120
12 REMOTE PORTS 125
12.1 General 125
12.1.1 Ethernet port setting on TRA3000 125
12.1.2 IP address setting on PC 125
12.1.3 Technical Data of the RS 232C serial port 126
12.1.4 Local or Remote Control 126
12.1.5 Remote Control 127