User Manual Chapter 15
GFK-1742F Jan 2020
Using the Electronic CAM Feature 347
Step 3: Create a CAM Profile
The next step is to create a simple CAM profile. The CAM profiles are linked to CAM blocks.
Additional information on this interlinking is contained within the on-line help. To create a
CAM profile, right-click the CAM Profiles icon in the Navigator window and select New Profile
as shown in the following figure.
Figure 161: Create New CAM Profile
This inserts a new profile named “Profile1” into the library as seen in the following figure.
Figure 162: New Profile Creation
To Next Page
Loading...
