User Manual Appendix H
GFK-1742F Jan 2020
Using VersaPro with the DSM314 490
Step 3: Create a CAM Profile
The next step is to create a simple CAM profile in the CAM editor. The CAM Editor has a CAM
profile library that is created by the user. The CAM profiles within the library are then linked
to the CAM blocks. Additional information on this interlinking is contained within the on-
line help. For this example, a profile must first be created in the library. One method to
perform this step is to right-click the “CAM Profiles” icon in the Navigator window. The
short-cut menu appears. Select New Profile as shown in Figure 252.
Figure 252: Create New CAM Profile
To Next Page
Loading...
