86 DCM00044 REV. 14
B.1 Declaration of Conformity
Figure B.1 Declaration of Conformity
EC DECLARATION OF CONFORMITY
According to the Machinery Directive 2006/42/EC
and the EMC Directive 2014/34/EU.
We, the manufacturer
BRANSON DE MEXICO
Carretera Nacional km 8.5
Modulo Industrial America, Lote 4
Nuevo Laredo, Tamaulipas 88277
Mexico
represented in the community by
BRANSON ULTRASONICS, a.s.
Piestanska 1202
915 01 Nove Mesto nad Vahom
Slovak Republic
expressly declare under our sole responsibility that the equipment L20 Ultrasonic Welder System consisting of:
Branson welder model Ultraweld L20 Spot used with a Branson ultrasonic power supply model (TS or VGX) L20 (20:2.2 or
20:3.3 or 20:4.0) and associated cables.
in the state in which it was placed on the market, fulfills all the relevant provisions of the Machinery Directive 2006/42/EC
and the EMC Directive 2014/30/EU. The safety objectives set out in the Low Voltage Directive 2014/35/EU were kept in
accordance Annex 1 No. 1.5.1 of the Machinery Directive 2006/42/EC.
The object of this declaration is in conformity with relevant Union harmonization legislation. The equipment, to which this
declaration relates, is in conformity with the following standards:
EN 60204-1:2018
EN ISO 12100:2010
EN ISO 13849-1:2015
EN ISO 13849-2:2012
EN ISO 13850:2015
EN 55011:2016/A1:2017
EN 61000-6-2:2005
Nuevo Laredo, Tamaulipas, MX
Luis Benavides
April 8, 2022 Branson Product Safety Officer
CE Marking Affixed: 2022
CC: Technical Publications
Person authorised to compile the technical file:
BRANSON ULTRASONICS, a.s.
Piestanska 1202
91501 Nove Mesto nad Vahom
Slovak Republic
To Next Page
Loading...
