48 DCM00002 REV. 16
5.7 Preset Menu Screen
Figure 5.6 Preset Menu screen
Preset Menu Screen
The controller allows for the storage of weld settings. The stored information is known as
a preset. When a name is created and saved in the library, presets may then be saved
under that name.
Press one of the following options for this screen:
MAKE NEW
To clear the current preset name in use. Advanced settings will default to those set under
Configuration.
NAME
To create or edit a Preset Name. See 5.8 Preset Name Screen.
LIBRARY
To save a preset by name for later recall. See 5.9 Preset Library Screen.
EXIT
To return to Menu Options. See 5.3 Menu Options Screen.
To Next Page
Loading...
