DCM00002 REV. 16 61
5.19 Sequence Library Screen
Figure 5.18 Sequence Library screen
Sequence Library Screen
When a sequence has been named and configured it must be stored in the library memory
in order to retrieve it at a later date. The sequence that has been created or is in use is
shown at the top of the screen.
Not available on Ultrasplice 40 & ST 40 actuators.
Press one of the following options for this screen:
UP or DOWN ARROWS
(Inside the storage register display window). To scan the sequence library a page at a
time.
UP or DOWN ARROWS
(Outside the storage register display window). To position the selection cursor next to the
sequence storage register you wish to fill, edit or retrieve from.
REVIEW
To view the presets associated with the selected sequence.
GET
To retrieve the sequence into current memory.
SAVE
To retain the sequence information in a selected register.
CLEAR
To clear a stored sequence from its storage register.
EXIT
To return to the Sequence Menu. See 5.16 Sequence Menu Screen.
To Next Page
Loading...
