DCM00044 REV. 14 47
4.6 Safety Devices
The removal, bridging or disabling of safety devices is not condoned for production
operation. Individual safety devices mentioned below may only be disabled if super-
ordinate safety devices are employed in their place.
4.6.1 Emergency Stops
In case of danger, hit the red, emergency stop Which is found on the red, top portion of
the foot pedal. Twist the emergency stop to reset the system. The actuator, power supply,
and related fixtures are returned to the “Home” position. If dual anti-tie start buttons are
used, there must be a red emergency stop associated in line. Free access to the
emergency stop button must be maintained.
4.6.2 Actuator Covers
The Ultraweld L20 Actuator is equipped with covers which should only be removed for
maintenance and installation purposes.
To Next Page
Loading...
