2 DCM00003 REV. 07
1.1 Intended Use
This equipment is for the joining of metal parts using ultrasonic energy. A complete
system includes an actuator, controller and tooling (which delivers mechanical energy to
the work pieces). Some systems also include special fixturing and machine automation.
Branson systems may only be utilized to weld soft, ductile, metal parts together with
Branson-supplied weld tooling (such as horns, tips, anvils, and converters) unless an
explicit, written, contrary agreement between the ordering party and Branson has been
consummated.
To Next Page
Loading...
