DCM00002 REV. 16 iii
Foreword
Congratulations on your choice of a Branson system!
The Branson Touchscreen Controller system is a process equipment for the joining of
metal parts using ultrasonic energy. It is the newest generation of product using this
sophisticated technology for a variety of customer applications. This Operating Manual is
part of the documentation set for this system, and should be kept with the equipment.
Thank you for choosing Branson!
Introduction
This manual is arranged into several structured chapters which will help you find the
information you may need to know to safely handle, install, set up, program, operate,
and/or maintain this product. Please refer to the Table Of Contents of this manual to find
the information you may be looking for. In the event you require additional assistance or
information, please contact our Product Support department (see 1.5 How to Contact
Branson for information on how to contact them) or your local Branson representative.
This Instruction Set includes information for the Touchscreen Controller and actuator.
Please refer to the Table Of Contents of this Instruction Set to find specific information.
NOTICE
This document is intended for use with the following Branson
products: Touchscreen Controller with a Welder.
To Next Page
Loading...
