DCM00044 REV. 14 iii
Foreword
Congratulations on your choice of a Branson system!
The Branson Ultraweld L20 Series system is process equipment for the joining of metal
parts using ultrasonic energy. It is the newest generation of product using this
sophisticated technology for a variety of customer applications. This Operating Manual is
part of the documentation set for this system, and should be kept with the equipment.
Thank you for choosing Branson!
Introduction
This manual is arranged into several structured chapters which will help you find the
information you may need to know to safely handle, install, set up, program, operate,
and/or maintain this product. Please refer to the
Table of Contents of this manual to find
the information you may be looking for. In the event you require additional assistance or
information, please contact our Product Support department (see 1.5
How to Contact
Branson for information on how to contact them) or your local Branson representative.
To Next Page
Loading...
