30 DCM00044 REV. 14
3.1 Shipping and Handling
The Ultraweld L20 Actuator is a system of metal and electro-pneumatic components that
move the ultrasonic tooling in the ultrasonic welding system and control aspects of the
weld process. Many of its components can be harmed if the unit is dropped, shipped under
improper conditions, or otherwise mishandled.
3.1.1 Environmental Specifications
The following environmental guidelines should be respected in the shipping of the
Ultraweld L20 Actuator unit.
Table 3.1 Environmental Requirements
Environment Range
Storage / Shipping Temperature -13º F to +131º F (-25º C to +55º C)
Humidity 30% to 90% non condensing
To Next Page
Loading...
