Endress+Hauser Analytik Jena multi N/C 2100S User Manual

multi N/C 2100S Specifications
111
Control/analysis (control and
analysis software multiWin)
Real-time graphics, status indication during analysis,
graphical display of the measured results, result print-
out
Data integrity and conformity with FDA 21 CFR Part 11
and EudraLex Vol. 4 Annex 11 (for multiWin pharma)
Electrical variables
Connection 230 V AC, optionally 115 V AC, 50/60 Hz
Protection 230 V: T 6,3 A H
115 V: T 6,3 A H
(Use only original fuses of Analytik Jena AG)
Typical average power
consumption
400 VA
PC interface USB 2.0
Environmental conditions
Temperature during storage 5 – 55 °C
Temperature during operation 10 – 35 °C
Humidity during operation max. 90 % at +30 °C
Humidity during storage 10 – 30 % (use desiccant)
Air pressure 0.7 – 1.06 bar
Operating system: Windows 7 Professional or better
Processor: 3.2 GHz or better
Working memory: 4 GB min.
Free hard disk space: 40 GB min.
Drive: CD/DVD drive (for software installation)
Monitor resolution: 1024 x 768 min.
Interfaces 1 USB 2.0 interface min. (for connecting the multi N/C)
Minimum equipment for
the control and analysis
unit

Endress+Hauser Analytik Jena multi N/C 2100S Specifications

General

Brand	Endress+Hauser
Model	Analytik Jena multi N/C 2100S
Category	Measuring Instruments
Language	English