Endress+Hauser Analytik Jena multi N/C 2100S - Fig. 28 Window SELECTION CALIBRATION Report

multi N/C 2100S Operation
59
 CalibrationReport into an export file
The calibration report (with the extension *.ajc) is saved in the export directory
..\Calibration.
 Export into a CSV file (*.csv)
The CSV file is saved in the preconfigured directory (default ...\multiWin\CSV).
The directory is selected in the window O
PTIONS  tab FILES AND DIRECTORIES (main
window menu command C
ONFIGURATION  EDIT OPTIONS).
 Export to clipboard
1. In the main window open the menu command D
ATA EVALUATION  CALIBRATIONREPORT.
2. In the window S
ELECTION CALIBRATIONREPORT select the calibration report.
Note:
In the window S
ELECTION CALIBRATIONREPORT filters can be set, if necessary, and the
records sorted by clicking on the respective header.
Fig. 28 Window SELECTION CALIBRATION report
3. Highlight the corresponding calibration report and click on the button [OK].
 The calibration report is displayed.
Reopening a calibration
report