multi N/C 2100S Basic Information
7
1 Basic Information
1.1 User manual notes
The user manual describes the following models of the multi N/C series:
multi N/C 2100S
multi N/C 2100S dup
multi N/C 2100S pharma
In the text below these devices are collectively called multi N/C 2100S. Differences are
explained in the corresponding section.
The analyzer multi N/C 2100S is intended for operation by qualified specialist personnel
observing this user manual.
The user manual informs about the design and operation of the analyzer and provides
personnel familiar with TOC/TN analysis the necessary know-how for the safe handling
of the equipment and its components. The user manual further includes notes on the
maintenance and service of the equipment and potential causes and remedies of any
faults.
The multi N/C 2100S duo modular measuring system enables the automated analysis of
liquid and solid samples. The layout, installation and operation of this measuring system
are described in the user manual for the HT 1300 solids module. Pay particular
attention to the information on switching between liquid and solid operation given
there.
The multi N/C 2100S pharma offers a tailored solution for total nitrogen analysis in
pharmaceutical aqueous solutions. Information relating to the determination of total
carbon content given in this user manual does not apply to the multi N/C 2100S
pharma.
Instructions for actions which occur in chronological order are numbered and combined
in action units.
Warnings are marked by a warning triangle and a signal word. The type, source and
consequences of the danger are stated together with notes on preventing the danger.
The elements of the control and analysis program are indicated as follows:
Terms used in the program are identified with
SMALL CAPS (e.g., Menu FILE).
Buttons are identified by square brackets (e.g., [OK] button)
Menu items are separated by arrows (e.g. F
ILE OPEN)
Conventions
To Next Page
Loading...
Need help?
General
