EasyManuals Logo

Endress+Hauser Analytik Jena multi N/C 2100S User Manual

Endress+Hauser Analytik Jena multi N/C 2100S
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Basic Information multi N/C 2100S
8
The user manual uses the following symbols and signal words to indicate hazards or
instructions. The safety instructions are always placed before an action.
WARNING
Indicates a potentially hazardous situation which might cause
fatal or very serious
injuries (deformations).
CAUTION
Indicates a potentially hazardous situation which might cause minor or moderate
injuries.
NOTICE
Indicates potential damage to equipment or the environment.
1.2 Area of application
1.2.1 General
The analyzer multi N/C 2100S is a device for detecting the total organic carbon content
and/or total nitrogen content in aqueous samples by way of digestion using
thermocatalytic high temperature oxidation in the presence of special catalysts in
accordance with national and international standards.
When using the integrated Double Furnace solids module or connecting an external
solids module, the analyzer can be used to determine the total carbon content in solids
samples.
The multi N/C 2100S pharma is a dedicated total nitrogen analyzer for aqueous
pharmaceutical samples. This model is always delivered with a CLD detector. It does not
contain a NDIR detector for total carbon determination. Furthermore, the Analytik Jena
AG does not offer solids modules or a ChD detector for the multi N/C 2100S pharma.
1.2.2 Analyzer area of application
The analyzer multi N/C 2100S is versatile in its application due to its large measuring
range, high degree of automation and expandability.
Pharma industry
By the utilization of a micro liter syringe, the direct injection analyzer multi N/C 2100S
pharma is well-suited for carry-over free protein determination in aqueous solutions
(e.g. vaccines) from small sample quantities. The pharma model is also optimal for TN
cleaning validation. The multiWin pharma software fully complies with the requirements
of the FDA 21 CFR part 11 and EudraLex Vol. 4 Annex 11.
Water treatment
The multi N/C 2100S can be used for waste water analysis in municipal and industrial
treatment systems. Complex and saline water bodies can also be safely analyzed.
Symbols and signal words
multi N/C 2100S pharma
multi N/C 2100S

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Endress+Hauser Analytik Jena multi N/C 2100S and is the answer not in the manual?

Endress+Hauser Analytik Jena multi N/C 2100S Specifications

General IconGeneral
BrandEndress+Hauser
ModelAnalytik Jena multi N/C 2100S
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals