Endress+Hauser OXY5500 - Spare Parts

OXY5500 Optical Oxygen Analyzer BA02195C
A
–6 Endress+Hauser
Spare Parts
Below is a list of spare parts for the OXY5500 Optical Oxygen Analyzer with
recommended quantities for 2 years of operation. Not all parts listed are
included on every analyzer. When ordering, please specify the system serial
number to ensure that the correct parts are identified.
Table A–2 Replacement parts for OXY5500 analyzer
Part Number Description
2 YR
QTY
Electronics Assembly Components
EX3700000001
Window, Enclosure
1
1. Consult with Technical Support (refer to page B–19) before attempting replacement.
-
EX1600000001
Window Gasket, Enclosure
1
-
2400002173
OXY5500 Display
1
-
EX1100000002 Replacement Kit, Transmitter, OXY5500 -
EX4000000001 Power Supply, Module, AC100-240V to DC24V 1.3A 1
EX4000000003 Power Supply, DC/DC Conv., 15W, 24V, DIN 1
4300002034 Cartridge Fuse, 216 Series, 5 x 20mm, Fast Act 800 mA,
250V
1
EX3100000004
Communication Board
1
-
Optical Fiber Probes and Installation Accessories
3100002235 Optical Fiber Assembly, OP-9 Sensor Probe, 1000ppm,
0.7 m, SMA
1
3100002242 Optical Fiber Assembly, OP-9 Sensor Probe, 1000ppm,
2.5 m, SMA
1
3100002243 Optical Fiber Assembly, OP-9 Sensor Probe, 1000ppm,
5.0 m, SMA
1
3100002239 Optical Fiber Assembly, OP-6 Sensor Probe, 5%, 0.7 m,
SMA
1
3100002240 Optical Fiber Assembly, OP-6 Sensor Probe, 5%, 2.5 m,
SMA
1
3100002241 Optical Fiber Assembly, OP-6 Sensor Probe, 5%, 5.0 m,
SMA
1
3100002236 Optical Fiber Assembly, OP-3 Sensor Probe, 50%,
0.7 m, SMA
1
3100002237 Optical Fiber Assembly, OP-3 Sensor Probe, 50%,
2.5 m, SMA
1
3100002238 Optical Fiber Assembly, OP-3 Sensor Probe, 50%,
5.0 m, SMA
1