Endress+Hauser OXY5500 - Storage; Disclaimers; Warranty

BA02195C OXY5500 Optical Oxygen Analyzer
Endress+Hauser B
–21
Storage
The packaged analyzer should be stored in a sheltered environment that is
temperature controlled between -20C (4F) and 70C (158F) and should
not be exposed to direct sun, rain, snow, condensing humidity or corrosive
environments.
Disclaimers
Endress+Hauser accepts no responsibility for consequential damages arising
from the use of this equipment. Liability is limited to replacement and/or repair
of defective components.
This manual contains information protected by copyright. No part of this guide
may be photocopied or reproduced in any form without prior written consent
from Endress+Hauser.
Warranty
For a period of 18 months from date of shipment or 12 months in operation,
whichever comes first, Endress+Hauser warrants that all products sold by it
shall be free from defects in material and workmanship under normal use and
service when correctly installed and maintained. Endress+Hauser’s sole liability
and Customer’s sole and exclusive remedy for a breach of warranty is limited
to Endress+Hauser’s repair or replacement (at Endress+Hauser’s sole option)
of the product or part thereof which is returned at Customer’s expense to
Endress+Hauser’s plant. This warranty shall apply only if Customer notifies
Endress+Hauser in writing of the defective product promptly after the
discovery of the defect and within the warranty period. Products may only be
returned by Customer when accompanied by a return authorization reference
number (SRO) issued by Endress+Hauser. Freight expenses for products
returned by Customer will be prepaid by Customer. Endress+Hauser shall pay
for shipment back to Customer for products repaired under warranty. For
products returned for repair that are not covered under warranty,
Endress+Hauser’s standard repair charges shall be applicable in addition to all
shipping expenses.