OXY5500 Optical Oxygen Analyzer BA02195C
1
–4 Endress+Hauser
Instructional symbols
Documents Provided with the OXY5500 Analyzer
Each OXY5500 analyzer shipped from the factory is packaged with documents
and software that are to be used for system operation, as applicable to the
system configuration. Typically, each shipment includes the following
documents:
• Operating Instruction (electronic copy)
• Sample Conditioning System (SCS) Operating Instruction
(electronic copy)
• OXY5500 Service Software Operating Instruction (electronic copy)
(and software)
• OXY5500 Safety Instruction (paper copy)
• Calibration Certificate (paper copy)
Manufacturer Address
Endress+Hauser
11027 Arrow Route
Rancho Cucamonga, CA 91730
United States
www.endress.com
General notes and important information concerning the
installation and operation of the analyzer.
Failure to follow all directions may result in damage or
malfunction of the analyzer.
Warning statement for hazardous voltage. Contact may cause
electric shock or burn. Turn off and lock out system before
servicing.
Maximum voltage and current specifications for fuses.
To Next Page
Loading...
