Endress+Hauser OXY5500 - To Enter Editing Mode; To Exit the Editing Mode; Analog Output Settings (Analogues) Menu

BA02195C OXY5500 Optical Oxygen Analyzer
Endress+Hauser 4
–11
To enter editing mode
1. Press to enter editing mode.
2. Change the setting or value (one digit at a time) using the
buttons.
3. Press the again to save editing changes.
To exit the editing mode
• Press to cancel and exit.
Analog Output Settings (Analogues) Menu
From the MAIN MENU, select Analogues to change the analog output settings.
Refer to Figure 4–14.
Before displaying the ANALOGUES screen, a message window displays
requesting confirmation to abort the currently running operation. Refer to
Figure 4–15.
Figure 4–14 Main menu screen - Analogues
selected