BA02195C OXY5500 Optical Oxygen Analyzer
Endress+Hauser 4
–13
Measurement Menu Options
Selecting Measurement from the MAIN MENU will open the SIMPLE screen. The
DETAILS or GRAPH screens can be selected from the SIMPLE screen.
Simple screen
This screen displays the oxygen and temperature values from the moment the
measurement was started. Refer to Figure 4–16.
If the measurement temperature was set manually, the temperature value is
already shown before starting the measurement.
If automatic temperature measurement is selected and the temperature sensor
is not connected or not working properly, the display will show an error
message. Refer to Figure 4–17.
In manual mode, the temperature unit can be changed. Values
ranging from -99° C to 199° C can be input into the MEAS.
SETTINGS window. Refer to “Temperature compensation” on
page 4-19.
Figure 4–16 Simple measurement screen
To Next Page
Loading...
