OXY5500 Optical Oxygen Analyzer BA02195C
4
–10 Endress+Hauser
Digitals Menu
From the MAIN MENU, select Digitals to change the digital connection setting
of the OXY5500. Refer to Figure 4–12.
Before displaying the DIGITALS screen, a message window displays requesting
confirmation to abort the currently running operation. Refer to Figure 4–13.
Select Yes
and stop the measurement to proceed with the Digitals settings.
The DIGITALS menu is divided into three screens: RS-232, RS-485 and TCP/IP
settings. Refer to “Digitals Menu Options” on page 4-50 for more
information for setting these options.
• Press the buttons to navigate between input fields.
Figure 4–12 Main menu screen - Digitals
selected
Figure 4–13 Message window - Stop
measurements during configuration
To Next Page
Loading...
