Endress+Hauser OXY5500 - Setting New RATA Mult. Manually; Digitals Menu Options; RS-232 Settings

OXY5500 Optical Oxygen Analyzer BA02195C
4
–50 Endress+Hauser
5. Press .
The display will switch to the MEASUREMENT screen automatically.
Setting new RATA mult. manually
1. Navigate to the New RATA Mult. box and click .
2. Use the buttons to change the value (between 0.001 to
9.999) one digit at a time.
Press again.
Digitals Menu Options
Set RS-232, RS-485 and TCP/IP configurations from the Digitals button on the
MAIN MENU.
RS-232 settings
Use this screen to set the baud rate of the RS-232 channel. Refer to Figure
4–50.
There is no automatic reset for RATA. This feature cannot be
manually reset to ‘off’ (1).