BA02195C OXY5500 Optical Oxygen Analyzer
Endress+Hauser 4
–29
About screen
The ABOUT screen provides the Serial Number, LED Status and Firmware
Version of the OXY5500. Refer to Figure 4–30.
Sensor details screen
Information about the currently selected sensor is available through the
SENSOR DETAILS screen. Refer to Figure 4–31. The sensor type is displayed at
the top of the screen. Below, all calibration data and sensor constants are
shown.
Make sure to have the analyzer information found in the ABOUT
screen before contacting “Service” on page B-19.
Figure 4–30 About screen
To Next Page
Loading...
