Endress+Hauser OXY5500 - Measurement Settings (Meas. Settings) Menu

BA02195C OXY5500 Optical Oxygen Analyzer
Endress+Hauser 4
–5
Measurement Menu
Selecting Measurement from the MAIN MENU screen displays the currently
measured values and measurement settings. Refer to Figure 4–5.
Views can be selected for simple, detailed or graphical presentations of the
measurements. Use the buttons to switch between screens. Refer to
“Measurement Menu Options” on page 4-13 for more information on
accessing screen views from this menu selection.
Measurement Settings (Meas. Settings) Menu
General measurement setting changes are performed in the MEASUREMENT
SETTINGS menu. If the measurement settings are not changed, the settings
from the last measurement will be applied.
The Measurement Settings (Meas. Settings
) window is selected from the MAIN
MENU screen. Refer to Figure 4–6.
If power to the analyzer is disabled, Time and Date settings will
be set to zero. Before starting a new measurement, reset the
Time and Date in “Device settings screen” on page 4-26, so
that the correct measurement time is stored with the data.
Figure 4–5 Main menu screen - Measurement
selected