BA02195C OXY5500 Optical Oxygen Analyzer
Endress+Hauser 4
–51
• The Baudrate for the RS-232 channel can be set to 9600, 19200,
38400, 57600 or 115200.
• The ID, which is used in the Modbus communication, can be set to
any value between 1 and 32.
• Parity can be set to Even, Odd or None.
All settings are applied by pressing
.
RS-485 settings
Use this screen to set the baud rate of the RS-485 channel. Refer to Figure
4–51.
Setting the Parity to “None” will also set the number of stop bits
to two. Odd and Even settings will use one stop bit.
Figure 4–50 Digitals - RS-232 settings
To Next Page
Loading...
