BA02195C OXY5500 Optical Oxygen Analyzer
Endress+Hauser 4
–7
2. Press the Yes button to stop the measurement in order to display the
MEASUREMENT SETTINGS screen. Refer to Figure 4–8.
3. Use the arrow buttons to navigate between screens.
To enter editing mode
1. Press to enter editing mode.
2. Change the setting or value (one digit at a time) by pressing the
buttons.
3. Press again to save the changes.
To exit editing mode
1. Press to cancel and exit.
Refer to “Measurement Settings (Meas. Settings) Menu Options” on
page 4-19 for more information on setting temperature compensation,
pressure compensation, interval or logging and data management.
Figure 4–8 Measurement settings screen
To Next Page
Loading...
