BA02195C OXY5500 Optical Oxygen Analyzer
Endress+Hauser 4
–9
In the SENSOR OPTIONS window, the user can select the Change Parameters
button for the connected sensor, the Calibration
button to perform a sensor
calibration or the RATA
(Relative Accuracy Test Audit) button. Refer to Figure
4–11.
• : Navigate up and down in the sensor list.
• : Select the sensor options. The display will switch to
respective screens.
• : Return to the MAIN MENU screen.
Refer to “Change parameters” on page 4-30 and “Calibrating the
analyzer” on page 4-35 for more information about these functions.
Figure 4–11 Sensor options
To Next Page
Loading...
