Endress+Hauser Proline 200 - Page 100

Commissioning Proline Prowirl F 200 PROFIBUS PA
100 Endress+Hauser
Parameter Prerequisite Description Selection / User
entry
Factory setting
Mol% Ne The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Gas mixture
option is selected.
• In the Gas mixture
parameter, the Neon Ne
option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% NH3 The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Gas mixture
option is selected.
• In the Gas mixture
parameter, the Ammonia
NH3 option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% O2 The following conditions are
met:
In the Select medium
parameter, the Gas option is
selected.
– In the Select gas type
parameter, the Gas mixture
option is selected and in the
Gas mixture parameter, the
Oxygen O2 option is
selected.
Or
– In the Select gas type
parameter, the Natural gas
option is selected and in the
Density calculation
parameter, the ISO 12213-
2 option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% SO2 The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Gas mixture
option is selected.
• In the Gas mixture
parameter, the Sulfur
dioxide SO2 option is
selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% Xe The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Gas mixture
option is selected.
• In the Gas mixture
parameter, the Xenon Xe
option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %