Endress+Hauser Proline 200 - Endress+Hauser Services

Proline Prowirl F 200 PROFIBUS PA Repair
Endress+Hauser 179
Sparepartsfor
Sparepart
Item
Partno./structure
Sensor
1
2
3
4
5
6
7
8
9
10
Mainelectronic
I/Omodule
Cover(front)
Cover(right)
T
ransmitter
Display
Additionalinformation:
www.endress
.com/dev
iceviewer
4
7
2
6
3
5
1
1
2
A0014017
 35 Example for "Spare part overview sign" in connection compartment cover
1 Measuring device name
2 Measuring device serial number
Measuring device serial number:
• Is located on the device nameplate and the spare part overview sign.
• Can be read out via the Serial number parameter in the Device information
submenu .
14.3 Endress+Hauser services
Endress+Hauser offers a wide range of services.
Your Endress+Hauser Sales Center can provide detailed information on the services.
14.4 Return
The measuring device must be returned if it is need of repair or a factory calibration, or if
the wrong measuring device has been delivered or ordered. Legal specifications require
Endress+Hauser, as an ISO-certified company, to follow certain procedures when handling
products that are in contact with the medium.
To ensure safe, swift and professional device returns, please refer to the procedure and
conditions for returning devices provided on the Endress+Hauser website at
http://www.endress.com/support/return-material
14.5 Disposal
14.5.1 Removing the measuring device
1. Switch off the device.
2.
L
WARNING
Danger to persons from process conditions.
‣
Beware of hazardous process conditions such as pressure in the measuring device,
high temperatures or aggressive fluids.
Carry out the mounting and connection steps from the chapters "Mounting the
measuring device" and "Connecting the measuring device" in the logically reverse
sequence. Observe the safety instructions.