Endress+Hauser Proline 200 - Turning the Transmitter Housing

Proline Prowirl F 200 PROFIBUS PA Installation
Endress+Hauser 27
Post mounting
! 20…70
(! 0.79 to 2.75)
1
4 x
SW 13
A0019862
 9 Engineering unit mm (in)
1 Post retainer kit for post mounting
6.2.5 Turning the transmitter housing
To provide easier access to the connection compartment or display module, the transmitter
housing can be turned.
max.350°
8mm
8mm
A0013713
1. Release the fixing screw.
2. Turn the housing to the desired position.
3. Firmly tighten the securing screw.
6.2.6 Turning the display module
The display module can be turned to optimize display readability and operability.