Proline Prowirl F 200 PROFIBUS PA System integration
Endress+Hauser 63
9 System integration
9.1 Overview of device description files
9.1.1 Current version data for the device
Firmware version 01.01.00 • On the title page of the Operating instructions
• On transmitter nameplate
• Firmware version parameter
"Diagnostics" menu → Device information
→ Firmware version
Release date of firmware version 10.2014 ---
Manufacturer ID 0x11 Manufacturer ID parameter
"Diagnostics" menu → Device information
→ Manufacturer ID
Device type code 0x1564 Device type parameter
"Diagnostics" menu → Device information → Device
type
Profile version 3.02 ---
For an overview of the different firmware versions for the device → 176
9.1.2 Operating tools
The suitable device description file for the individual operating tools is listed in the table
below, along with information on where the file can be acquired.
Operating tool via
PROFIBUS protocol
Sources for obtaining device descriptions
FieldCare • www.endress.com → Download Area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
SIMATIC PDM
(Siemens)
www.endress.com → Download Area
9.2 Device master file (GSD)
In order to integrate field devices into a bus system, the PROFIBUS system needs a
description of the device parameters, such as output data, input data, data format, data
volume and supported transmission rate.
These data are available in the device master file (GSD) which is provided to the PROFIBUS
Master when the communication system is commissioned. In addition device bit maps,
which appear as icons in the network structure, can also be integrated.
With the Profile 3.0 device master file (GSD) it is possible to exchange field devices made
by different manufacturers without having to reconfigure.
Generally speaking two different GSD versions are possible with Profile 3.0 and higher.
• Before configuring, the user must decide which GSD should be used to operate the
system.
• The setting can be changed via a Class 2 master.
To Next Page
Loading...
