Diagnostics and troubleshooting Proline Prowirl F 200 PROFIBUS PA
176 Endress+Hauser
12.11 Firmware history
Release
date
Firmwar
e
version
Order code
for
"Firmware
version"
Firmware changes Documentation
type
Documentation
10.2014 01.01.00 Option 73 • No need to restart
device after parameter
download
• Additional process
variables:
– Pressure
– Degree of
overheating
– Specific volume
• Process variables
interconnectable with
local display and data
logger (trend)
• Additional AI channels:
– Pressure
– Degree of
overheating
– Specific volume
– Density
– Reynolds number
• Verification progress is
displayed (0-100%)
• New Wet Steam
Measurement
application package
• Operation in steam
simplified
• More robust signal
processing in event of
low flow rates in wet
steam
Operating
Instructions
BA01222D/06/EN/
01.14
10.2013 01.00.00 Option 77 Original firmware Operating
Instructions
BA01222D/06/EN/
01.13
Flashing the firmware to the current version or to the previous version is possible via
the service interface (CDI) .
For the compatibility of the firmware version with the previous version, the installed
device description files and operating tools, observe the information about the device
in the "Manufacturer's information" document.
The manufacturer's information is available:
• In the Downloads area of the Endress+Hauser web site: www.endress.com →
Downloads
• Specify the following details:
– Text search: Manufacturer's information
– Media type: Documentation – Technical Documentation
To Next Page
