Diagnostics and troubleshooting Proline Prowirl F 200 PROFIBUS PA
172 Endress+Hauser
Filter categories
• All
• Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)
• Information (I)
12.8.3 Overview of information events
Unlike a diagnostic event, an information event is displayed in the event logbook only and
not in the diagnostic list.
Info number Info name
I1000 --------(Device ok)
I1079 Sensor changed
I1089 Power on
I1090 Configuration reset
I1091 Configuration changed
I1092 Trend data deleted
I1110 Write protection switch changed
I1137 Electronic changed
I1151 History reset
I1154 Reset terminal voltage min/max
I1155 Reset electronic temperature
I1156 Memory error trend
I1157 Memory error event list
I1185 Display backup done
I1186 Restore via display done
I1187 Settings downloaded with display
I1188 Display data cleared
I1189 Backup compared
I1227 Sensor emergency mode activated
I1228 Sensor emergency mode failed
I1256 Display: access status changed
I1264 Safety sequence aborted
I1335 Firmware changed
I1397 Fieldbus: access status changed
I1398 CDI: access status changed
I1444 Device verification passed
I1445 Device verification failed
I1459 Failed: I/O module verification
I1461 Failed: Sensor verification
I1512 Download started
I1513 Download finished
I1514 Upload started
I1515 Upload finished
To Next Page
Loading...
