Endress+Hauser Proline 200 - Page 134

Operation Proline Prowirl F 200 PROFIBUS PA
134 Endress+Hauser
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Assign channel 1 to 4 The Extended HistoROM
application package is
available.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Assign process variable to
logging channel.
• Off
• Volume flow
• Corrected volume
flow
• Mass flow
• Flow velocity
• Temperature
• Calculated
saturated steam
pressure
• Steam quality
• Total mass flow
• Condensate mass
flow
• Energy flow
• Heat flow
difference
• Reynolds number
• Density
• Pressure
• Specific volume
• Degrees of
superheat
• Vortex frequency
• Electronic
temperature
Off
Logging interval The Extended HistoROM
application package is
available.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Define the logging interval for
data logging. This value
defines the time interval
between the individual data
points in the memory.
1.0 to 3 600.0 s 10.0 s
Clear logging data The Extended HistoROM
application package is
available.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Clear the entire logging data. • Cancel
• Clear data
Cancel