Endress+Hauser Proline 200 - Page 97

Proline Prowirl F 200 PROFIBUS PA Commissioning
Endress+Hauser 97
Parameter Prerequisite Description Selection / User
entry
Factory setting
Mol% HCl The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Gas mixture
option is selected.
• In the Gas mixture
parameter, the Hydrogen
chloride HCl option is
selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% He The following conditions are
met:
In the Select medium
parameter, the Gas option is
selected.
– In the Select gas type
parameter, the Gas mixture
option is selected and in the
Gas mixture parameter, the
Helium He option is
selected.
Or
– In the Select gas type
parameter, the Natural gas
option is selected and in the
Density calculation
parameter, the ISO 12213-
2 option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% i-C4H10 The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Natural gas
option is selected.
• In the Density calculation
parameter, the ISO 12213-
2 option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% i-C5H12 The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Natural gas
option is selected.
• In the Density calculation
parameter, the ISO 12213-
2 option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %
Mol% Kr The following conditions are
met:
• In the Select medium
parameter, the Gas option is
selected.
• In the Select gas type
parameter, the Gas mixture
option is selected.
• In the Gas mixture
parameter, the Krypton Kr
option is selected.
Enter amount of substance for
the gas mixture.
0 to 100 % 0 %