Endress+Hauser Proline Promag 10 - Page 90

10 Technical data PROline Promag 10
90 Endress+Hauser
Promag P
nominal diameter
Pressure rating Internal diameter
Measuring tube
DIN
[mm]
ANSI
[inch]
DIN
[bar]
ANSI
[lbs]
JIS with PTFE
[mm]
25 1" PN 40 Cl 150 20K 26
32 − PN 40 − 20K 35
40 1 1/2" PN 40 Cl 150 20K 41
50 2" PN 40 Cl 150 10K 52
65 − PN 16 − 10K 67
80 3" PN 16 Cl 150 10K 80
100 4" PN 16 Cl 150 10K 104
125 − PN 16 − 10K 129
150 6" PN 16 Cl 150 10K 156
200 8" PN 10 Cl 150 10K 202
250 10" PN 10 Cl 150 10K 256
300 12" PN 10 Cl 150 10K 306
Promag H
nominal diameter
Pressure ratings * Measuring tube
internal diameter**
DIN
[mm]
ANSI
[inch]
DIN
[bar]
PFA
2 1/12" PN 16 / PN 40 2.25
4 5/32" PN 16 / PN 40 4.5
8 5/16" PN 16 / PN 40 9.0
15 1/2" PN 16 / PN 40 16.0
– 1" PN 16 / PN 40 22.6
25 – PN 16 / PN 40 26.0
40 1 1/2" PN 16 / PN 40 35.3
50 2" PN 16 / PN 40 48.1
65 2 1/2" PN 16 / PN 40 59.9
80 3" PN 16 / PN 40 72.6
100 4" PN 16 / PN 40 97.5
* The pressure rating depends on the process connection and the seals used (see Page 82)
** Internal diameter of process connections see Technical Information on Promag 10 (separate
document) → Page 91