Endress+Hauser Proline Promag H 300 - Performing Electrode Cleaning

Commissioning Proline Promag H 300 PROFINET
116 Endress+Hauser
Parameter Prerequisite Description Selection / User
entry
Factory setting
Display language A local display is provided. Set display language. • English
• Deutsch
• Français
• Español
• Italiano
• Nederlands
• Portuguesa
• Polski
• русский язык
(Russian)
• Svenska
• Türkçe
• 中文 (Chinese)
• 日本語 (Japanese)
• 한국어 (Korean)
• ةّيبَرَعْلا (Arabic)
*
• Bahasa Indonesia
• ภาษาไทย (Thai)
*
• tiếng Việt
(Vietnamese)
• čeština (Czech)
English
(alternatively, the
ordered language is
preset in the device)
Display interval A local display is provided. Set time measured values are
shown on display if display
alternates between values.
1 to 10 s 5 s
Display damping A local display is provided. Set display reaction time to
fluctuations in the measured
value.
0.0 to 999.9 s 0.0 s
Header A local display is provided. Select header contents on local
display.
• Device tag
• Free text
Device tag
Header text In the Header parameter, the
Free text option is selected.
Enter display header text. Max. 12 characters
such as letters,
numbers or special
characters (e.g. @,
%, /)
------------
Separator A local display is provided. Select decimal separator for
displaying numerical values.
• . (point)
• , (comma)
. (point)
Backlight One of the following
conditions is met:
• Order code for "Display;
operation", option F "4-line,
illum.; touch control"
• Order code for "Display;
operation", option G "4-line,
illum.; touch control
+WLAN"
• Order code for "Display;
operation", option O
"Separate 4-line display,
illum.; 10m/30ft cable;
touch control"
Switch the local display
backlight on and off.
• Disable
• Enable
Enable
* Visibility depends on order options or device settings
10.6.5 Performing electrode cleaning
The Electrode cleaning circuit submenu contains parameters that must be configured for
the configuration of electrode cleaning.
The submenu is only available if the device was ordered with electrode cleaning.