Endress+Hauser Proline Promag H 300 - 12.10.2 Filtering the Event Logbook; 12.10.3 Overview of Information Events

Proline Promag H 300 PROFINET Diagnostics and troubleshooting
Endress+Hauser 177
12.10.2 Filtering the event logbook
Using the Filter options parameter you can define which category of event message is
displayed in the Events list submenu.
Navigation path
Diagnostics → Event logbook → Filter options
Filter categories
• All
• Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)
• Information (I)
12.10.3 Overview of information events
Unlike a diagnostic event, an information event is displayed in the event logbook only and
not in the diagnostic list.
Info number Info name
I1000 --------(Device ok)
I1079 Sensor changed
I1089 Power on
I1090 Configuration reset
I1091 Configuration changed
I1092 HistoROM backup deleted
I1137 Electronic changed
I1151 History reset
I1155 Reset electronic temperature
I1156 Memory error trend
I1157 Memory error event list
I1256 Display: access status changed
I1278 I/O module restarted
I1335 Firmware changed
I1351 Empty pipe detection adjustment failure
I1353 Empty pipe detection adjustment ok
I1361 Web server: login failed
I1397 Fieldbus: access status changed
I1398 CDI: access status changed
I1443 Coating thickness not determined
I1444 Device verification passed
I1445 Device verification failed
I1457 Measurement error verification failed
I1459 I/O module verification failed
I1461 Sensor verification failed
I1462 Sensor electronic module verific. failed
I1512 Download started
I1513 Download finished