Proline Promag H 300 PROFINET System integration
Endress+Hauser 73
9 System integration
9.1 Overview of device description files
9.1.1 Current version data for the device
Firmware version 01.01.zz • On the title page of the Operating instructions
• On the transmitter nameplate
• Firmware version
Diagnostics → Device information → Firmware
version
Release date of firmware version 07.2019 –
Manufacturer ID 0x11 Manufacturer ID
Diagnostics → Device information → Manufacturer ID
Device ID 0x843C Device ID
Expert → Communication → PROFINET configuration
→ PROFINET information → Device ID
Device type ID Promag 300 Device Type
Expert → Communication → PROFINET configuration
→ PROFINET information → Device Type
Device revision 2 Device revision
Expert → Communication → PROFINET configuration
→ PROFINET information → Device revision
PROFINET version 2.3.x –
For an overview of the different firmware versions for the device → 180
9.1.2 Operating tools
The suitable device description file for the individual operating tools is listed in the table
below, along with information on where the file can be acquired.
Operating tool via
Service interface (CDI)
Sources for obtaining device descriptions
FieldCare • www.endress.com → Download Area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
DeviceCare • www.endress.com → Download Area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
9.2 Device master file (GSD)
In order to integrate field devices into a bus system, the PROFINET system needs a
description of the device parameters, such as output data, input data, data format and data
volume.
These data are available in the device master file (GSD) which is provided to the
automation system when the communication system is commissioned. In addition device
bit maps, which appear as icons in the network structure, can also be integrated.
The device master file (GSD) is in XML format, and the file is created in the GSDML
description markup language.
To Next Page
Loading...
