Endress+Hauser Proline Promag H 300 - 12.12 Device information

Proline Promag H 300 PROFINET Diagnostics and troubleshooting
Endress+Hauser 179
12.12 Device information
The Device information submenu contains all parameters that display different
information for device identification.
Navigation
"Diagnostics" menu → Device information
‣
Device information
Device tag
→  179
Serial number
→  179
Firmware version
→  179
Device name
→  179
Manufacturer
Order code
→  179
Extended order code 1
→  180
Extended order code 2
→  180
Extended order code 3
→  180
ENP version
→  180
Parameter overview with brief description
Parameter Description User interface Factory setting
Device tag Shows name of measuring point. Max. 32 characters such as
lower-case letters or numbers.
Promag
Serial number Shows the serial number of the measuring
device.
Max. 11-digit character string
comprising letters and
numbers.
–
Firmware version Shows the device firmware version installed. Character string in the format
xx.yy.zz
–
Device name Shows the name of the transmitter.

The name can be found on the
nameplate of the transmitter.
Promag 300/500 –
Order code Shows the device order code.

The order code can be found on the
nameplate of the sensor and
transmitter in the "Order code" field.
Character string composed of
letters, numbers and certain
punctuation marks (e.g. /).
–