Proline Promag H 300 PROFINET Accessories
Endress+Hauser 185
15.1.2 For the sensor
Accessories Description
Adapter set Adapter connections for installing a Promag H instead of a Promag 30/33 A or
Promag 30/33 H (DN 25).
Consists of:
• 2 process connections
• Screws
• Seals
Seal set For the regular replacement of seals for the sensor.
Spacer If replacing a DN 80/100 sensor in an existing installation, a spacer is needed if the
new sensor is shorter.
Welding jig Welding nipple as process connection: welding jig for installation in pipe.
Grounding rings Are used to ground the medium in lined measuring tubes to ensure proper
measurement.
For details, see Installation Instructions EA00070D
Mounting kit Consists of:
• 2 process connections
• Screws
• Seals
Wall mounting kit Wall mounting kit for measuring device (only DN 2 to 25 (1/12 to 1"))
15.2 Communication-specific accessories
Accessories Description
Field Xpert SFX350 Field Xpert SFX350 is a mobile computer for commissioning and maintenance. It
enables efficient device configuration and diagnostics for and can be used in non-
hazardous areas.
Operating Instructions BA01202S
Field Xpert SFX370 Field Xpert SFX370 is a mobile computer for commissioning and maintenance. It
enables efficient device configuration and diagnostics for and can be used in the
non-hazardous area and in the hazardous area.
Operating Instructions BA01202S
Field Xpert SMT70 The Field Xpert SMT70 tablet PC for device configuration enables mobile plant
asset management in hazardous and non-hazardous areas. It is suitable for
commissioning and maintenance staff to manage field instruments with a digital
communication interface and to record progress.
This tablet PC is designed as an all-in-one solution with a preinstalled driver library
and is an easy-to-use, touch-sensitive tool which can be used to manage field
instruments throughout their entire life cycle.
• Technical Information TI01342S
• Operating Instructions BA01709S
• Product page: www.endress.com/smt70
To Next Page
Loading...
