Endress+Hauser Proline Promag H 300 - Displaying the Communication; Interface

Commissioning Proline Promag H 300 PROFINET
88 Endress+Hauser
Parameter Prerequisite Description Selection Factory setting
Corrected volume flow unit – Select corrected volume flow
unit.
Result
The selected unit applies for:
Corrected volume flow
parameter (→  129)
Unit choose list Country-specific:
• Nl/h
• Sft³/h
Corrected volume unit – Select corrected volume unit. Unit choose list Country-specific:
• Nm³
• Sft³
10.5.3 Displaying the communication interface
The Communication submenu shows all the current parameter settings for selecting and
configuring the communication interface.
Navigation
"Setup" menu → Communication
‣
Communication
MAC address
→  88
IP address
→  88
Subnet mask
→  88
Default gateway
→  88
Parameter overview with brief description
Parameter Description User interface / User entry Factory setting
MAC address Displays the MAC address of the measuring
device.

MAC = Media Access Control
Unique 12-digit character
string comprising letters and
numbers, e.g.:
00:07:05:10:01:5F
Each measuring device is given
an individual address.
IP address IP address of the Web server integrated in
the measuring device.
If the DHCP client is switched off and write
access is enabled, the IP address can also be
entered.
4 octet: 0 to 255 (in the
particular octet)
192.168.1.212
Subnet mask Displays the subnet mask.
If the DHCP client is switched off and write
access is enabled, the Subnet mask can also
be entered.
4 octet: 0 to 255 (in the
particular octet)
255.255.255.0
Default gateway Displays the default gateway.
If the DHCP client is switched off and write
access is enabled, the Default gateway can
also be entered.
4 octet: 0 to 255 (in the
particular octet)
0.0.0.0