Endress+Hauser Proline Promag H 300 - Sensor Nameplate

Proline Promag H 300 PROFINET Incoming acceptance and product identification
Endress+Hauser 17
4.2.2 Sensor nameplate
Order code:
Ser. no.:
Ext. ord. cd.:
i
i
Date:
1
3
4
5
6
2
7
8
9
1112 10
13
A0029204
 3 Example of sensor nameplate
1 Name of the sensor
2 Place of manufacture
3 Order code
4 Serial number (ser. no.)
5 Extended order code (Ext. ord. cd.)
6 Flow; nominal diameter of the sensor; pressure rating; nominal pressure; system pressure; fluid temperature
range; material of liner and electrodes
7 Approval information for explosion protection, Pressure Equipment Directive and degree of protection
8 Flow direction
9 2-D matrix code
10 Manufacturing date: year-month
11 Document number of safety-related supplementary documentation
12 CE mark, C-Tick
13 Permitted ambient temperature (T
a
)
Order code
The measuring device is reordered using the order code.
Extended order code
• The device type (product root) and basic specifications (mandatory features) are
always listed.
• Of the optional specifications (optional features), only the safety and approval-
related specifications are listed (e.g. LA). If other optional specifications are also
ordered, these are indicated collectively using the # placeholder symbol (e.g. #LA#).
• If the ordered optional specifications do not include any safety and approval-related
specifications, they are indicated by the + placeholder symbol (e.g. XXXXXX-ABCDE
+).