Endress+Hauser Proline Promag H 300 - 12.13 Firmware history

Diagnostics and troubleshooting Proline Promag H 300 PROFINET
180 Endress+Hauser
Parameter Description User interface Factory setting
Extended order code 1 Shows the 1st part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
Extended order code 2 Shows the 2nd part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
Extended order code 3 Shows the 3rd part of the extended order
code.

The extended order code can also be
found on the nameplate of the sensor
and transmitter in the "Ext. ord. cd."
field.
Character string –
ENP version Shows the version of the electronic
nameplate (ENP).
Character string 2.02.00
12.13 Firmware history
Release
date
Firmware
version
Order code
for
"Firmware
version"
Firmware
changes
Documentation
type
Documentation
09.2019 01.01.zz Option 65 System redundancy S2 Operating
Instructions
BA01718D/06/EN/03.19
10.2017 01.00.zz Option 71 Original firmware Operating
Instructions
BA01718D/06/EN/01.17
It is possible to flash the firmware to the current version using the service interface.
For the compatibility of the firmware version with the installed device description files
and operating tools, observe the information about the device in the "Manufacturer's
information" document.
The manufacturer's information is available:
• In the Download Area of the Endress+Hauser web site: www.endress.com →
Downloads
• Specify the following details:
• Product root: e.g. 5H3B
The product root is the first part of the order code: see the nameplate on the
device.
• Text search: Manufacturer's information
• Media type: Documentation – Technical Documentation