Endress+Hauser Proline Promag H 300 - Using the Parameter to Enter the Access Code; Carrying out a Sensor Adjustment; Configuring the Totalizer

Commissioning Proline Promag H 300 PROFINET
110 Endress+Hauser
‣
WLAN settings
→  117
‣
Heartbeat setup
‣
Configuration backup
→  119
‣
Administration
→  120
10.6.1 Using the parameter to enter the access code
Navigation
"Setup" menu → Advanced setup
Parameter overview with brief description
Parameter Description User entry
Enter access code Enter access code to disable write protection of parameters. Max. 16-digit character string comprising
numbers, letters and special characters
10.6.2 Carrying out a sensor adjustment
The Sensor adjustment submenu contains parameters that pertain to the functionality of
the sensor.
Navigation
"Setup" menu → Advanced setup → Sensor adjustment
‣
Sensor adjustment
Installation direction
→  110
Parameter overview with brief description
Parameter Description Selection Factory setting
Installation direction Set sign of flow direction to match the
direction of the arrow on the sensor.
• Flow in arrow direction
• Flow against arrow direction
Flow in arrow direction
10.6.3 Configuring the totalizer
In the "Totalizer 1 to n" submenu the individual totalizer can be configured.
Navigation
"Setup" menu → Advanced setup → Totalizer 1 to n
‣
Totalizer 1 to n
Assign process variable
→  111