Endress+Hauser Proline Promag H 300 - Function Scope of the Control Totalizer Parameter; Function Scope of the Reset All Totalizers Parameter

Proline Promag H 300 PROFINET Operation
Endress+Hauser 135
Navigation
"Operation" menu → Totalizer handling
‣
Totalizer handling
Control Totalizer 1 to n
→  135
Preset value 1 to n
→  135
Reset all totalizers
→  135
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Control Totalizer 1 to n A process variable is selected
in the Assign process variable
parameter of the Totalizer
1 to n submenu.
Control totalizer value. • Totalize
• Reset + hold
• Preset + hold
• Reset + totalize
• Preset + totalize
• Hold
Totalize
Preset value 1 to n A process variable is selected
in the Assign process variable
parameter of the Totalizer
1 to n submenu.
Specify start value for totalizer.
Dependency

The unit of the selected
process variable is
specified for the totalizer
in the Unit totalizer
parameter.
Signed floating-point
number
0 l
Reset all totalizers – Reset all totalizers to 0 and
start.
• Cancel
• Reset + totalize
Cancel
11.6.1 Function scope of the "Control Totalizer" parameter
Options Description
Totalize The totalizer is started or continues running.
Reset + hold The totaling process is stopped and the totalizer is reset to 0.
Preset + hold The totaling process is stopped and the totalizer is set to its defined start value
from the Preset value parameter.
Reset + totalize The totalizer is reset to 0 and the totaling process is restarted.
Preset + totalize The totalizer is set to the defined start value from the Preset value parameter and
the totaling process is restarted.
Hold Totalizing is stopped.
11.6.2 Function scope of the "Reset all totalizers" parameter
Options Description
Cancel No action is executed and the user exits the parameter.
Reset + totalize Resets all totalizers to 0 and restarts the totaling process. This deletes all the flow
values previously totalized.