Endress+Hauser Proline Promag H 300 - 8.3 Access to the operating menu via the local display

Operation options Proline Promag H 300 PROFINET
50 Endress+Hauser
8.3 Access to the operating menu via the local display
8.3.1 Operational display
X X X X X X XX X
4
2
1
3
5
l/h
1120.50
F
A0029346
1 Operational display
2 Device tag
3 Status area
4 Display area for measured values (4-line)
5 Operating elements→  55
Status area
The following symbols appear in the status area of the operational display at the top right:
• Status signals→  143
• F: Failure
• C: Function check
• S: Out of specification
• M: Maintenance required
• Diagnostic behavior→  144
• : Alarm
• : Warning
• : Locking (the device is locked via the hardware )
• : Communication (communication via remote operation is active)
Display area
In the display area, each measured value is prefaced by certain symbol types for further
description:
Measured values
Symbol Meaning
Volume flow
Conductivity
Mass flow
Totalizer

The measurement channel number indicates which of the three totalizers is
displayed.
Status input