Endress+Hauser Proline Promag H 300 - Page 144

Diagnostics and troubleshooting Proline Promag H 300 PROFINET
144 Endress+Hauser
Diagnostic behavior
Symbol Meaning
Alarm
• Measurement is interrupted.
• Signal outputs and totalizers assume the defined alarm condition.
• A diagnostic message is generated.
Warning
Measurement is resumed. The signal outputs and totalizers are not affected. A diagnostic
message is generated.
Diagnostic information
The fault can be identified using the diagnostic information. The short text helps you by
providing information about the fault. In addition, the corresponding symbol for the
diagnostic behavior is displayed in front of the diagnostic information on the local display.
Operating elements
Key Meaning
Plus key
In a menu, submenu
Opens the message about remedy information.
Enter key
In a menu, submenu
Opens the operating menu.